New S770 Combine

S Series
VALUE MY TRADE REQUEST A QUOTE
VALUE MY TRADE REQUEST A QUOTE
Key Features
  • Combine Advisor™ package helps to set, optimize and automate main combine functions when conditions change
  • Fully automated yield sensor calibration with ActiveYield™ supplies accurate data with no time spent calibrating
  • Comfortable S700 cab is common with tractors and sprayers for ease of use
  • Continued quality manufacturing of S-Series combines maximizes uptime and productivity

More Info

Features

Combine Advisor™
#

Combine Advisor is a suite of technologies designed to maximize harvesting profits. The features help the operator set and optimize the S700 Combine and then automates the combine to maintain performance target as conditions change. Purchasing Combine Advisor grants access to the Integrated Combine Adjustment 2 (ICA2) application, which houses three automation technologies: HarvestSmart™ system for automation of feed rate, Active Terrain Adjustment™ (ATA) system for terrain change management, and Auto Maintain with ActiveVision™ cameras for crop condition change management.

Combine Advisor also provides easy navigation of the S700 set and optimize features: harvest settings application for initial set up and setting storage, VisionTrak system for monitoring losses and harvesting performance, and the Interactive Combine Adjustment (ICA) performance wizard for step-by-step guidance of combine setting optimization. Once John Deere Combine Advisor is set into motion, the operator will experience ease-of-use benefits coupled with increased productivity.

 

Code

Description

1962

 

Combine Advisor

Base features, plus ATA and ICA2. Includes ActiveVision cameras.

 

Base features include ICA, TouchSet™ system, VisionTrak, HarvestSmart, and engine speed management. HarvestSmart and engine speed management only included with code 2020 (ProDrive™ transmission). Engine speed management only available with Final Tier 4 (FT4) engines.

ICA2 hardware and software

Beginning in late summer/early fall, retrofit bundles for ICA2 will be available for model year 2018 and future models. The bundles include ActiveVision cameras, harnesses, Auto Maintain, and software.

 

Dealer installation instructions are included, as weldments and drilling are required. The process will most likely take around 10 hours of labor.

 

Bundle

Description

BXE11034

ICA2 retrofit bundle for S760 and S770 Combines

Also requires BXE10948 Active Terrain Adjustment bundle if the combine is not already equipped.

BXE11035

ICA2 retrofit bundle for S780 and S790 Combines

Also requires BXE10948 Active Terrain Adjustment bundle if the combine is not already equipped.

ICA2 retrofit bundle componentsICA2 retrofit bundle components
Bundle components
Camera material imaging sensor
Drive pressure separator
Grain quality bracket mounting parts
Grain quality controller module
ETN Intelligent Power Management (IPM) controller software
ETN CABC software
IPM - cab wall video wiring harness
IPM - grain quality wiring harness
IPM - tailing camera wiring harness
IPM - rethresher wiring harness
IPM mounting bracket
Mount to elevator
Combine Advisor video
ICA2 Application
ICA2 run pageICA2 run page

The ICA2 application provides the tools needed to set the combine to get the most out of it and automatically adjust settings to maintain optimum performance. Inside this application on the 4600 CommandCenter™ display, the operator will find many tools including easy-to-adjust current machine settings, priority setting for automation guidance, application status indicators, automation activity history overviews, and live grain analysis camera feeds.

 

Additionally, the operator can access the Optimize Performance wizard, activate three automation technologies, and set the performance targets the machine will automatically adjust to maintain.

 

Feature benefits:

  • Efficient combine operation with a one-page application for animation technologies
  • Improved combine settings management with settings, priorities, and status information all on one reference page
  • Reduced operator training and efficient, easy control of harvest settings through an intuitive run page and user interface

 

Functionality:

ICA2 run pageICA2 run page

The ICA2 application page gives the operator seamless access to many features.

  • Section A (yellow highlight): takes the operator to the current settings for concave clearance, rotor speed, fan speed, chaffer clearance, and sieve clearance, giving quick access to critical combine adjustments.
  • Section B (blue highlight): the Optimize Performance button uses a wizard to help the operator optimize combine performance.
  • Section C (pink highlight): the HarvestSmart system automates ground speed control during harvest to maintain a constant crop load.
  • Section D (orange highlight): the Active Terrain Adjustment system increases productivity and reduces tailings volume when harvesting up and down hills.
  • Section E (green highlight): indicates the operator’s priorities for automation.
  • Section F (red highlight): Auto Maintain monitors the combine and makes adjustments to maintain the performance at the operator-set performance target.
  • Section G (purple highlight): Auto Maintain also uses the buttons in section G to allow a glimpse into live views of the clean grain and tailings elevators and allows operators to use an analyzer function to see what Auto Maintain is seeing.

 

 

  • The automation features are dependent on the performance target sets. There are two ways a grower achieves an optimal target:
    • Combine optimization with the aid of ICA2 Optimize Performance wizard
    • Dealer support via a combine optimization value added service
  • Combine Advisor has been available as a factory-installed option since model year 2018 combines.
  • Auto Maintain is compatible for corn, soybeans, wheat, canola, and barley.
  • HarvestSmart is included only with ProDrive transmission code 2020.
  • Active Terrain Adjustment is an optional feature that is orderable with codes 1961 or 1962.
Auto Maintain

Auto Maintain with ActiveVision cameras is technology that works by automatically adjusting S700 Combine settings to maintain the ideal targeted performance. When harvesting corn, soybeans, wheat, canola, or barley, the combine will maintain the performance of everything from grain loss and grain quality to foreign material in the grain tank. The ActiveVision cameras, along with grain loss monitors, are specifically designed to identify the impact of crop condition changes and adjust the combine to maintain target performance, allowing the operator to focus on other challenges of harvest.

 

Feature benefits:

  • Simply harvest by automating the critical workload of constantly managing combine settings when conditions change
  • Increase productivity by allowing ActiveVision cameras to identify and address tough-to-spot problems such as cracked grain
  • Provides flexibility in planning overall business and increases the productivity of the combine independent of operator experience
ICA2 run pageICA2 run page

Functionality

Auto Maintain looks at the level at which the combine is performing, sets that as the goal, and automates combine settings to continually hit the target performance goal over and over again. Auto Maintain uses existing sensor inputs along with the ActiveVision cameras to make decisions for accurate combine adjustments. It does not use grain moisture as an input, however. Auto Maintain is able to hit the target goal by automatically making adjustments to the threshing speed, concave clearance, chaffer clearance, sieve clearance, and fan speed. The ActiveVision cameras have been trained by university experts to analyze the clean grain and tailings material and input that analysis into the Auto Maintain system. Auto Maintain will show the operator how it has been performing with a constantly updating historical graph of losses, grain quality, and foreign material in the clean grain. The green-shaded area below indicates the performance targets set. The colored lines show the ongoing levels of losses and quality. For example, the green, purple, and orange lines below show a period of time outside of the green-shaded acceptable area. Auto Maintain with ActiveVision cameras recognizes this and the Combine Advisor package makes the appropriate adjustments to meet the set targets.

Historical Auto Maintain performance graphHistorical Auto Maintain performance graph

The ActiveVision cameras can detect broken and unthreshed grain. The cameras will also detect lightweight and heavy foreign material to make the appropriate combine changes. If the operator wants to see the grain as well, the system will highlight the broken and unthreshed grain to make it easier to analyze. The live view and historical graphs update constantly and the cameras can even tell the operator if there is debris on the lens.

Grain analysis live viewGrain analysis live view
 

Combine Advisor with Auto Maintain is available as a factory-installed option on combines since model year 2018. Auto Maintain is compatible in corn, soybeans, wheat, canola, and barley. 

Additional Combine Advisor features:
  • Active Terrain Adjustment (ATA) feature
  • Drive more productivity with HarvestSmart system
  • Interactive Combine Adjustment (ICA)
  • Harvest setup
  • Monitor losses and harvesting performance with VisionTrak system
  • John Deere engine speed management
4600 CommandCenter™ Display

The 4600 CommandCenter is the central information system used on all John Deere S700 Combines starting in 2018. The display allows the operator to view various important harvest and diagnostic information during harvesting and see it in a layout based on operator preferences. The 4600 CommandCenter has been developed in combination with the CommandARM™ console and the multifunction control lever to deliver outstanding ergonomics paired with best-in-class natural navigation.

4600 CommandCenter4600 CommandCenter

Feature benefits:

  • Display is easy to use due to its commonality across John Deere agriculture products
  • Large area for information provided by a 25.4-cm (10-in.) screen
  • Quick and easy navigation with touch functionality
  • 10 percent less button presses compared to the previous design because of an app-based user interface with simpler navigation
  • Easy, logical, and intuitive operation with five run pages which can be configured by operators according to their preferences
  • Quick, convenient access to the most used apps on the display as custom configured on nine hot keys
  • Improved uptime due to display interface time savings including shortcut keys below the display that allow access to the most important combine functions
  • Natural navigation with easy and clear structure
  • To increase digital display area and have even more overview, an Extended Monitor is available

 

Functionality:

Five run pages can be configured by the operator according to their preferences for easy, logical, and intuitive operation. By scrolling to the left and right on the display, the operator can conveniently switch from run page to run page just like on a smartphone. In addition, the operator can switch the run pages from the multifunction control lever. This means the operator does not have to move their hand off of the controls but is still able to navigate through run pages.

John Deere 4600 CommandCenter controlsJohn Deere 4600 CommandCenter controls

A. Next and previous run page

B. Status center

C. Shortcut keys

D. Menu

E. Run page

F. Title bar

 

The 4600 CommandCenter features up to nine configurable buttons, allowing operators to personalize the access to their favorite apps so they spend less time browsing through the menu.

Nine configurable shortcut keys for quick access on displayNine configurable shortcut keys for quick access on display

Below the 4600 CommandCenter the operator will find 14 shortcut keys guiding directly through the most important areas during the harvesting day, saving time and clicks as well as keeping the main focus on the harvest.

 

The 14 shortcut keys below display grants quick and easy access:

#
#

Operators that prefer even more digital surface than the 4600 CommandCenter are able to equip their S700 Combine with an Extended Monitor on the cornerpost. The Extended Monitor includes a bracket and adapter harness. The bracket allows the operator to flip up the Extended Monitor for improved visibility during road transport and maneuvering the combine.

Extended MonitorExtended Monitor

The 4600 CommandCenter in the armrest supports following features:

  • Compatible with 254-mm (10-in.) touchscreen display
  • CommandCenter AutoTrac™ assisted steering system capable
    • AutoTrac is in base for model year 2019 with code 1851
  • JDLink™ telematics system
  • Wireless Data Transfer (WDT)
  • Remote Display Access (RDA)
  • Interactive Combine Adjustment and Integrated Combine Adjustment 2 (ICA and ICA2)
  • HarvestSmart™ system
  • Active Terrain Adjustment™ system
  • ActiveYield™ system    
  • Four camera inputs
  • Diagnostics and calibration
  • Harvesting information
  • Engine information
  • Header setup
  • Export screenshots and troubleshooting information
  • CommandCenter Premium 3.0 Activation capable
Layout manager
Layout manager selection pageLayout manager selection page
Layout manager module buildLayout manager module build

The 4600 CommandCenter features a modular-designed layout manager, so operators can easily create the page views that meet their needs. From the factory, machines are equipped with default run pages. An unlimited number of run pages can be added to the 4600 CommandCenter based on operator preference or operational needs. Toggling between run pages is as easy as using the arrow buttons on the top right portion of the title bar.

On-screen help and diagnostic text

There are a number of different ways to get meaningful on-screen help when navigating the 4600 CommandCenter. Operators can find the help icon on the shortcut bar on the bottom of every page. This icon gives detailed information on everything from combine operation to application information. Simply select the help icon and navigate to the information section that is needed.

Help iconHelp icon
Help center main pageHelp center main page

Additionally, application-based help is also available in all locations of the CommandCenter. Simply click on the {i} icon available on the title bar, and it will lead directly to more information on the application currently being used.

{i} icon{i} icon
Work setup application

Work setup places the settings needed to properly setup AutoTrac, documentation, and Section Control in a single location.

Settings include:

  • Client, farm, and field
  • Crop type
  • Machine dimensions

Work setup can be quickly accessed from a shortcut key or the display menu, allowing operators and managers to quickly review display and machine settings to ensure a job is completed properly.

Work setup shortcut key (far left)Work setup shortcut key (far left)

Option code

Description

1822 - base

4600 CommandCenter 254-mm (10-in.) color display – 4600 processor

Includes 4600 processor v2 and single 254-mm (10-in.) display. Processor equipped with CommandCenter controls and four video inputs included. CommandCenter Premium Activation capable. Documentation and CommandCenter AutoTrac are included in base software. For Machine Sync and A-B line sharing, an additional 2630 display is necessary. For more details on Machine Sync, please reference this dealer bulletin.

1828

4600 CommandCenter 254-mm (10-in.) color display with extended monitor – 4600 processor

Includes 4600 processor v2 and a 254-mm (10-in.) display on CommandARM with a second 254-mm (10-in.) display on cornerpost. Extended monitor includes bracket and adapter harness. Processor equipped with CommandCenter controls and four video inputs included. CommandCenter Premium Activation capable. Documentation and CommandCenter AutoTrac are included in base software.

1851 - base

CommandCenter AutoTrac Activation

Includes non-transferrable, machine-specific AutoTrac functionality on the integrated Gen 4 CommandCenter. CommandCenter AutoTrac is non-transferable and not available on the GreenStar™ 3 (GS3) 2630 Display.

System accuracy is dependent on the StarFire™ receiver signal accuracy.

1857

CommandCenter Premium 3.0 Activation

Includes non-transferrable, machine-specific AutoTrac, Data Sync, Section Overlap Control, AutoTrac RowSense™, and In-Field Data Sharing functionality on the Gen 4 CommandCenter.

To enable Wireless Data Transfer or Data Sync, a JDLink Connect subscription is required. Activation is machine specific and only available with a 4600 processor.

System accuracy is dependent on the StarFire receiver signal accuracy.

Only available for Australia, Canada, New Zealand, and the United States.

 

 

Automatic shifting with ProDrive™ transmission
Harvesting in slopesHarvesting in slopes
Harvesting in rolling groundHarvesting in rolling ground

The industry-exclusive ProDrive system uses PowerShift™ transmission technology to automatically shift between two speed ranges as ground conditions and terrain change to keep the combine harvesting at the desired ground speed.  Valuable harvest time will no longer be lost shifting on hills and when exiting fields to start transporting.

Feature benefit:

  • Precise control of the combine speed (when going up or down hills) without the need to continuously monitor and adjust the multifunction control lever
  • Retain high levels of productivity through the speed ranges with shift-on-the-go technology
  • Maintain ground speed when engaging four-wheel drive (4WD) (if equipped)
  • Operator-selected maximum speed within each range, allowing for more precise control of the combine in delicate operations (for example, when hooking up headers)

The ProDrive system on S700 Combines includes an integrated HarvestSmart™ feedrate control system to provide the maximum productivity and reduce operator stress and fatigue.

Functionality:

 

The ProDrive hydrostatic motor has a higher displacement than the previous hydrostatic systems. Both the pump and motor are variable-displacement components that allow ProDrive to maintain high levels of torque to the ground throughout each of the two operating-speed ranges.

 

Range one can be set for typical harvesting speeds. Range two can be used when higher speeds are needed during harvest or when transporting the combine.

 

The ground speed can be infinitely varied within both modes by the operator, using the multifunction control lever on the CommandARM™ armrest console. The multifunction lever regulates the high-capacity, variable hydrostatic pump and motor that drives the ground speed.

 

Using the navigation tools on the armrest, the operator can dial in the desired maximum-attainable speed within each of the two speed ranges. The maximum forward speed in either range can be set from 0 to 38.6 km/h (0 to 24 mph). The maximum speed in range one cannot be set higher than the maximum speed for range two. For example, if a maximum harvest speed of 13 km/h (8 mph) is desired and set, the full forward position of the hydrostatic control handle will deliver the speed of 13 km/h (8 mph).

 

The ProDrive transmission is equipped with an electrohydraulic differential lock with a four-pinion differential.  Non-ProDrive combines have a two-pinion differential. When operating in muddy, hilly terrain or in sandy conditions that may cause one of the tires to lose traction, this differential lock enables the operator to maintain productivity. If traction is lost, the operator can quickly and easily engage the differential lock by pressing the differential lock button on the CommandARM armrest console. An indicator light within the button alerts the operator that the differential locking feature is engaged.

Platform tilt increases header productivity from the combine

Platform tilt allows operators to hydraulically adjust the fore-aft pitch of front-end equipment at the touch of a button from inside the cab to adapt to changing crop and field conditions.

Feature benefit:
  • Maximizes performance of header in down crop or changing field conditions to extend the harvest day by up to one hour
  • Achieves customized fore-aft angle of header with 17 degrees of tilt
  • Adjusts from inside the cab, on the go
Hydraulic fore-aft feederhouseHydraulic fore-aft feederhouse
Hydraulic fore-aft multifunction control leverHydraulic fore-aft multifunction control lever

The platform tilt feature includes a different multifunction lever (hydro handle) to adjust the feederhouse tilt frame from the cab.

Functionality:

All S700 Combines provide an optional hydraulic header fore-aft tilt capability from the cab. However, all S700 Combines include a front-tilting faceplate as standard equipment. This tilting faceplate allows static fore-aft adjustment of up to 17 degrees of tilt on the feederhouse to accommodate different header and tire combinations to ensure a parallel cutterbar-to-ground relationship. This prevents the cutterbar knife guards from bulldozing or the platform healing on the rear of the skid shoes.

 

NOTE: Hydraulic fore-aft adjustment range is limited based upon the front-end equipment attached to prevent header frame damage. Check availability in local Price Pages.

TriStream™ rotor designed for coarse grains and easy-threshing small grains

The TriStream rotor is unique to John Deere because it features a slightly tapered design in the threshing area for best-in-class grain quality while dramatically reducing the growling that often comes with heavy rotor loads. The TriStream rotor is recommended for producers who harvest mainly coarse grains along with easy-threshing small grains.

The spiral vanes surrounding the rotor guide the crop material through the threshing and separating area in a pull-and-release action to improve performance. This John Deere S700 Combine feature will generate less power consumption.

 

Feature benefits:

  • TriStream rotor technology reduces the force required to move material through the combine by as much as 20 percent, maximizing fuel efficiency.
  • The rifling grooves on the threshing elements allow the bullet-shaped rotor to move material more efficiently, maximizing crop threshing performance and grain quality.
  • Heavy-duty vanes on the top covers propel the crop smoothly rearward through the length of the rotor, ensuring all the threshed grain is separated.
S700 TriStream rotorS700 TriStream rotor

Functionality:

 

Fifteen cast-constructed threshing elements provide superior material handling with excellent grain quality.  The elements spiral around the rotor to control material flow.  In some harvesting environments, the dense-pack configuration (nine additional threshing elements) may be necessary. 

TriStream threshing elementsTriStream threshing elements

Conical top covers allow for smooth material movement within the threshing and separating area. The top covers have a radius larger than the rotor, allowing the material to expand as it travels along the top of the rotor. This design uses the pull-and-release action of crop material, aiding in the threshing and separating to reduce power consumption.

Conical top coversConical top covers
Variable-stream rotor designed for tough material handling

The industry-exclusive variable-stream rotor features a tapered design in the threshing section, which improves crop flow, enhances grain quality, and reduces power consumption. The variable-stream rotor with adjustable top cover transport vanes is recommended for producers of rice and in tough threshing conditions.

 

The variable-stream rotor smooths crop flow during tough handling conditions to maximize throughput. Along with the tough-material handling capabilities of the variable-stream rotor configuration, the straw quality and length can be improved due to the electrically adjustable top cover transport vanes.

 

Feature benefits:

  • The longer rotor taper in the threshing area allows improved material handling by providing smoother crop flow through the combine, maximizing threshing performance and fuel efficiency.
  • Electrically adjustable transport vanes allow operators to change the vane angle from the cab for improved straw quality.
S700 variable-stream rotorS700 variable-stream rotor

Functionality:

 

Fifteen cast-constructed threshing elements provide superior handling, improved durability and serviceability, and maintain excellent grain quality. The elements spiral around the rotor to move and control the material. In some harvesting conditions, 12 additional bolt-on threshing tines may be installed for increased material handling.

 

Rear discharge flights and a tapered rear cone improve material handoff to the rear discharge beater.

 

Electrically adjustable transport vanes allow operators to change the vane angle within the cab. Longer straw length can be accomplished when vanes are in the advanced position. 

Electric actuator for adjustable vanesElectric actuator for adjustable vanes

Specifications

Compare >>>

Select up to 2 models to compare specifications

John DeereS770 Combine
Add Model
Add Model
Key Specs
Engine type John Deere PowerTech™ PSS engine
9.0 L
548 cu in.
Rated power 292/278 kW
391/373 hp
Fuel capacity 950 L
250 gal.
Rotor length 312 cm
123 in.
Rotor diameter 76.2 cm
30 in.
Concave area 1.1 m2
11.8 sq ft
Separating area 1.54 m2
16.6 sq ft
Total cleaning area (louvered) 5.1 m2
54.9 sq ft
Grain tank size 10,600 L
300 bu
Unloading rate 116.3 L/s
3.3 bu/sec
Engine
Engine type John Deere PowerTech PSS engine
9.0 L
548 cu in.
Emission level Final Tier 4 / Tier 2 (Australia/New Zealand)
Rated speed 2,200 rpm
Rated power 292/278 kW
391/373 hp
Power boost @ rated speed 25 kW
34 hp
Fuel capacity 950 L
250 gal.
Engine family
Feeding
Drive type Fixed or variable or multi-speed
Conveyor chain slat type Cast iron
Width 139.7 cm
55 in.
Length 172.5 cm
67.9 in.
Feed Accelerator, Stone Trap (FAST) Reverser
Standard
Standard
Threshing/ Separating
Separator type Rotary
Rotor length 312 cm
123 in.
Rotor diameter 76.2 cm
30 in.
Rotor speed range 210-1,000 rpm
Concave area 1.1 m2
11.8 sq ft
Separating area 1.54 m2
16.6 sq ft
Discharge grate area 0.36 m2
3.9 sq ft
Cleaning
Front chaffer 0.5 m2
5.4 sq ft
Front chaffer extension
Pre cleaning
Chaffer 2.5 m2
26.9 sq ft
Sieve area 2.1 m2
22.6 sq ft
Total cleaning area (louvered) 5.1 m2
54.9 sq ft
Cleaning fan speed 620-1,350 rpm
Grain handling
Grain tank size 10,600 L
300 bu
Unloading auger length 6.9 or 7.9 m
22.5 or 26 ft
Unloading rate 116.3 L/s
3.3 bu/sec
Base weight - less head
Total machine 18,950 kg
41,778 lb
Manufacturing location
Country USA, East Moline, Illinois
Additional information
Date collected 04-May-2018

Accessories and Attachments

Bracket

10" Tablet Holder Kit - BXE10901
12” Tablet Holder Kit (Ipad Pro) - BXE10864

Camera Observation System

Motec Three Camera Bundle - KXE10433

The camera-ready feature is optional on all S700 Combines and provides factory-installed observation camera harnesses and brackets in the grain tank, on the unloading auger, and at the rear of the combine.

 

John Deere value:

  • Provides increased visibility options when unloading grain and maneuvering the combine in and out of the field
  • Four integrated camera views on the 4600 CommandCenter™ Display for more convenience

 

Functionality:

  • Quickly install compatible cameras, orderable from Service Parts
  • Harness and brackets are provided factory installed, cameras have to be ordered separately via Parts
Rearview camera locationRearview camera location
Unloading auger camera locationUnloading auger camera location
Unloading auger camera locationUnloading auger camera location
Grain tank camera locationGrain tank camera location
Camera trigger menuCamera trigger menu
  • Camera triggers with time menu for:
    • Reverse with separator on video trigger
    • Reverse with separator off video trigger
    • Separator video trigger
    • 3/4 grain tank video trigger
    • 4/4 grain tank video trigger
    • Trigger menu for cameras

 

NOTE: 4600 CommandCenter is capable of viewing up to four cameras simultaneously.

 

NOTE: Cameras are not included with factory-installed option. Please order cameras from Service Parts.

 

Voyager Camera - SWCVMS155B
Voyager One Camera Kit - SWVCMS155JD1
Voyager Three Camera Kit - SWVCMS155JD3

Chaffer and Sieve

10 mm Fixed Round Hole Sieve - AXE47285

Recommended in seed or specialty crops when precise sizing of crop is required.

3 mm Fixed Round Hole Sieve - AXE47286

Recommended in seed or specialty crops when precise sizing of crop is required.

Active Terrain Adjustment Conversion Bundle - BXE10729

Active Terrain Adjustment is a system that maximizes grain quality and minimizes grain loss when ascending or descending hills. The feature automatically adjusts the combine’s sieve and chaffer openings and carefully controls the cleaning fan speed, stabilizing tailings levels and ensuring a clean grain tank sample.

Adjustable Front Chaffer Louvers - BXE10692

The adjustable front chaffer allows the operator to manually open/close the raised front chaffer elements on the raised center front chaffer (pre-cleaner) depending on crop conditions. 

 

Feature benefit:

  • Allows the option to reduce air flow to the raised center front chaffer, depending on crop conditions
  • Reduces the buildup of material on the raised-center front chaffer in crops with dense green stalks

NOTE: Adjustable front chaffer will come factory installed with code 8498 on model year 2019 S700 Combines.

Adjustable front chaffer for combines prior to model year 2016Adjustable front chaffer for combines prior to model year 2016
Adjustable front chaffer for S700 combines model year 2016 and newer and S-Series CombinesAdjustable front chaffer for S700 combines model year 2016 and newer and S-Series Combines
Class 6/7 Side Hill Bundle - BXE10475
Parts included for side hill packageParts included for side hill package

The side hill performance package can improve combine performance on slopes up to 8 degrees (14 percent) by substantially reducing cleaning shoe grain loss to acceptable levels.

 

Feature benefit:

  • Reduces grain loss out of the rear of the combine on side hill slopes
  • Increases combine productivity by not having to slow down on side hill slopes

 

Functionality:

 

The side hill kit installed in the cleaning shoe of S700 Combines allows grain to be evenly distributed across the entire width of the shoe when harvesting in slopes. As grain moves to the rear of the combine, the dividers keep grain contained into four individual bays which prevents overloading one side of the cleaning shoe. Additionally, the rubber agitator paddles in each individual bay work with the oscillating motion of the cleaning shoe to move grain toward the center of each bay for increased utilization of the entire cleaning shoe width for increased performance and productivity.

General Purpose Chaffer - AXE47216
General Purpose Sieve - AXE47218

Concaves and Threshing

Concave Insert Bars for Round Bar Concaves (Set of 2) - BH84308

Round-bar concaves are standard equipment on corn combines and are recommended for use in corn and soybeans. Additionally, they are recommended for use in specialty crops such as edible beans and food corn.

 

Feature benefit:

  • Provide maximum grain quality and productivity when harvesting corn or soybeans
  • Allow versatility to harvest cereal grain crops when paired with the round-bar concave inserts
Round-bar multi-crop concaveRound-bar multi-crop concave
#

See concave recommendations to choose the concaves that are best for a grower's operation.

 

The front concave section is heat treated. All three sections are available to be heat treated as an option or in the extended-wear separator package.

Densepack Threshing Tines for Variable Stream Rotor - BXE10020

Additional threshing tine base weldments for installation into the DensePack locations of a variable-stream rotor can only be used to improve material handling in some tougher conditions such as rice and grass seed harvest.  This may decrease machine performance if used in dry, brittle-crop conditions. 

 

Feature benefit:

  • Rice machines ordered from the factory already come with these tines installed for increased productivity and capacity
  • Increase in machine performance in tough-threshing and damp crops
Variable-stream rotor equipped with DensePackVariable-stream rotor equipped with DensePack
Grain wear platesGrain wear plates
Rice wear platesRice wear plates
#

 

Wear plate kits (grain versus rice) must be ordered separately through Service Parts.

Discharge Flights for TriStream Rotors - BH84581
Rear of rotor with discharge paddlesRear of rotor with discharge paddles

Rotor discharge flights are available for STS combines when operating in specialty crops. The discharge flights are recommended for use in crops such as sunflowers and edible beans when operating in conditions that require rotor threshing speeds below 300 rpm. 

 

The discharge flights are designed to provide an aggressive push to the slow-moving crop material as it moves from the rotor housing into the discharge beater. The additional kick provided by the paddle design of the flighting significantly improves material flow and reduces possible plugging at the rear of the rotor at extremely low threshing speeds.

 

When operating in other crops where rotor speeds higher than 300 rpm are required (for example, soybeans, wheat, rice, etc.), it is recommended the discharge flights BE REMOVED to ensure adequate and even material flow through the rotor, as well as to provide better residue spread.

 

IMPORTANT:  Discharge flight paddles are NOT recommended for use in heavy, damp wheat or rice crops.

 

The discharge flight is for use on any 9650 STS, 9750 STS, 9660 STS, 9760 STS, 9860 STS, 9670 STS, 9770 STS, and 9870 STS Combines and does not require the combine to be fitted with any particular configuration of rotor discharge housings.

 

NOTE: Two rotor discharge flight paddles for 9560 STS, 9570 STS, and S550 STS Combines, AH219961 and AH219962, can be ordered through Service Parts.

Extended Wear Round Bar Concaves (Set of 3) - BXE10387

Round-bar concaves are standard equipment on corn combines and are recommended for use in corn and soybeans. Additionally, they are recommended for use in specialty crops such as edible beans and food corn.

 

Feature benefit:

  • Provide maximum grain quality and productivity when harvesting corn or soybeans
  • Allow versatility to harvest cereal grain crops when paired with the round-bar concave inserts
Round-bar multi-crop concaveRound-bar multi-crop concave
#

See concave recommendations to choose the concaves that are best for a grower's operation.

 

The front concave section is heat treated. All three sections are available to be heat treated as an option or in the extended-wear separator package.

Extended Wear Small Wire Concaves (Set of 3) - BXE10389

Small-wire concaves are standard equipment on small-grain combines and are recommended for use in wheat, barley, and other cereal crops. The small-wire concaves are recommended for use in specialty crops such as grass seed.

 

Feature benefits:

  • Provide maximum grain quality and productivity when harvesting small grains
  • Allow versatility to harvest specialty crops such as grass seed without having to switch out concaves
Small-wire concave for small grainSmall-wire concave for small grain

 

See concave recommendations to choose the concaves that are best for grower's operation.

 

The small-wire concaves are also available as an option with boronized treatment for extended-wear life. This process penetrates the surface of the concave with a layer of hard, wear-resistant material, extending the life of the concave up to twice as long, and is available in the extended-wear separator package.

 

IMPORTANT: Not recommended for use in corn.

 

 

Extended-Wear Large-Wire Concaves (Set of 3) - BXE10391

Large-wire concaves are standard on S700 Rice Combines and available as an option on corn and small-grain combines. They are recommended for rice, sorghum, soybeans, and corn.

 

Feature benefit:

  • Best separating performance in rice to maximize productivity
  • Versatility to perform well in soybean harvest, eliminating the need to change out concaves or purchase additional set of concaves
Large-wire concaveLarge-wire concave

Large-wire concaves are standard on S700 Rice Combines and available as an option on corn and small-grain combines.

 

They are recommended for rice, sorghum, soybeans, and corn.

 

See concave recommendations to choose the concaves that are best for grower's operation. 

 

As an option, all three sections can be boronized for extended-wear life. This process penetrates the surface of the concave with a layer of hard, wear-resistant material, extending life up to twice as long.

Large Wire Concaves (Set of 3) - BXE10390

Large-wire concaves are standard on S700 Rice Combines and available as an option on corn and small-grain combines. They are recommended for rice, sorghum, soybeans, and corn.

 

Feature benefit:

  • Best separating performance in rice to maximize productivity
  • Versatility to perform well in soybean harvest, eliminating the need to change out concaves or purchase additional set of concaves
Large-wire concaveLarge-wire concave

Large-wire concaves are standard on S700 Rice Combines and available as an option on corn and small-grain combines.

 

They are recommended for rice, sorghum, soybeans, and corn.

 

See concave recommendations to choose the concaves that are best for grower's operation. 

 

As an option, all three sections can be boronized for extended-wear life. This process penetrates the surface of the concave with a layer of hard, wear-resistant material, extending life up to twice as long.

Rice Performance Enhancement Package - BXE10491

This attachment is used for rice configured machines only. Rice performance enhancement package contains spike caps, and long threshing tines. When it is used in certain crop conditions, it may enhance the performance of the combine. Attachment includes instructions on how and when to use the components.

Spike capsSpike caps
Separator grate interruptersSeparator grate interrupters
Long threshing tinesLong threshing tines
Sectionalized Flat Bar Concave Cover Plates (Set of 3) - BH84534
Concave cover plates for round-bar concaves onlyConcave cover plates for round-bar concaves only

Concave sectionalized cover plates for round-bar concaves help to increase performance in the threshing area in tough conditions and can improve material distribution from the concaves to the cleaning system.

Sectionalized Round Bar Concave Cover Plates (Set of 3) - BH84535
Concave cover plates for round-bar concaves onlyConcave cover plates for round-bar concaves only

Concave sectionalized cover plates for round-bar concaves help to increase performance in the threshing area in tough conditions and can improve material distribution from the concaves to the cleaning system.

Small Wire Concaves (Set of 3) - Wide Body - BXE10388

Small-wire concaves are standard equipment on small-grain combines and are recommended for use in wheat, barley, and other cereal crops. The small-wire concaves are recommended for use in specialty crops such as grass seed.

 

Feature benefits:

  • Provide maximum grain quality and productivity when harvesting small grains
  • Allow versatility to harvest specialty crops such as grass seed without having to switch out concaves
Small-wire concave for small grainSmall-wire concave for small grain

 

See concave recommendations to choose the concaves that are best for grower's operation.

 

The small-wire concaves are also available as an option with boronized treatment for extended-wear life. This process penetrates the surface of the concave with a layer of hard, wear-resistant material, extending the life of the concave up to twice as long, and is available in the extended-wear separator package.

 

IMPORTANT: Not recommended for use in corn.

 

 

Engine

110V Pump Kit - SW110VDEFSS
12V Pump Kit - SW12VDEFSS
65 gal. Portable Dispensing Unit with lockable, hinged lid - SWDEFPDU65M
Air Compressor Conversion Kit - BXE10698
Air Compressor Conversion Kit - BXE10699
Brush Kit, Rotary Screen - AH228523

The rotary screen brush kit adds a series of brushes to the rotary screen. The brushes prevent debris from building up on the screen, allowing full air flow to the engine for cooling.

Engine

275 gal. Tote of John Deere Diesel Exhaust Fluid - SWDEF275
330 gal. Tote of John Deere Diesel Exhaust Fluid - SWDEF330
55 gal. drum of John Deere Diesel Exhaust Fluid - SWDEF055

FAST (Feed Accelerator and Stone Trap)

Contoured Serrated Feed Accelerator Wings - BH84027
Contoured serrated wear stripsContoured serrated wear strips
Regular straight serrated wear stripsRegular straight serrated wear strips

The serrated feed accelerator wings have a smooth contoured back to provide fast yet gentle crop handling while also featuring serrated edges for positive crop movement in viney crops such as edible beans.

 

The updated feed accelerator wings are recommended in place of the optional smooth accelerator wear strips attachment because they help to provide excellent grain quality without compromising feeding performance in edible beans.

NOTE: The standard straight serrated wear strips are still the recommended choice to use on the feed accelerator when harvesting in damp or green-stemmed-type crops.
Expanded Stone Trap Door - Wide Body - BH84496
Stone trap and stone trap handleStone trap and stone trap handle
#

The stone trap protects the combine's interior area by effectively catching stones deflected by the feed accelerator into the stone dump area before they enter the TriStream™ feed section.

  • Remote lever with an over-center latch makes cleanout fast and easy.
  • Trap requires no adjustment and provides worry-free harvesting when cutting close to the ground.
  • Adds no additional length to the feederhouse. Excellent line-of-sight visibility of the platform cutterbar is maintained.
  • No compromise in feeding material smoothly from the platform to the feederhouse conveyor chain.
  • No increase in front axle tire loading since feederhouse length is not extended.

 

Base Equipment On: S-Series Combines

 

Field-installation information

An expanded stone trap door with a two-piece front feed floor is available as a field-installed bundle. This bundle replaces the standard one-piece feed floor.

 

When harvesting crops such as corn, food corn, popcorn, and small grains, the front-piece floor section remains bolted in place. This allows 9 in. of opening across the width of the machine.

 

In rocky conditions such as beans and edible beans, the front floor section is removed to provide 11.5 in. of open area to the larger stone trap, allowing improved rock protection (22 percent increase in stone trap area).

 

Please refer to the chart below for retro-fit information

Feed Accelerator Slow Speed Drive  - BXE10741
Two-speed feed accelerator handle Two-speed feed accelerator handle

The slow-speed drive reduces the standard two-speed feed accelerator from 450 rpm/800 rpm to 320 rpm/770 rpm.

 

These lower speeds allow the feed accelerator to provide more gentle grain handling in delicate specialty crops such as edible beans, food corn, or popcorn. 

 

Having the slow-speed feed accelerator drive available as a factory-installed option allows those who plan on using this drive for harvesting all their crops to save the cost of discarding the standard feed accelerator drive parts in the field.

Feed Accelerator Smooth Wear Strips (Set of 30) - BH81489
Smooth-wear strips on feed acceleratorSmooth-wear strips on feed accelerator

The smooth-wear strips provide optimum grain quality in speciality crops such as popcorn and food corn. The bundle includes set of 30 wear strips to replace standard-equipment serrated wear strips.

Spike Feed Accelerator - BH84582
Tine FAST feed acceleratorTine FAST feed accelerator
Combed floorCombed floor

The enhanced rice performance attachment is recommended for improved harvesting capacity when rice conditions may be limited due to slugs and heavy loads from straw intake while harvesting. 

 

This attachment provides smoother feeding and better material handling, along with increased rice harvesting capacity. 

 

The attachment includes the tine feed accelerator and stone trap (FAST) system, combed floor, threshing tines, discharge paddles, and directions on how to move the existing feed accelerator to the discharge location. 

Threshing tinesThreshing tines
Discharge beaterDischarge beater
Tine Feed Accelerator - BH84416

Grain Handling

Additional Full Grain Tank Sensor - BXE10270
Grain tank level sensorGrain tank level sensor

The fast, easy way to let the operator know the combine’s grain tank is full when harvesting on side hills.

Feature benefits:
Beacons activatedBeacons activated
  • Improved accuracy when harvesting in hilly terrain 
  • Prevents overfilling the grain tank

 

Functionality:

 

An additional grain tank level indicator is available to help detect a full grain tank.

 

The beacon lights are also activated when the combine is in road transport mode.

Door, Regular Duty, Perforated - S660/S760, S670/S770, S680/S780 - BXE10094
Perforated Clean Grain Elevator Boot, Door - BH81519
Steel Paddle Tailing Elevator for all 9770 STS, 9870 STS, S670, S680, S690, S770, S780, S790 Combines - H229907

When harvesting in wet or dirty conditions, the steel-paddle tailings elevator can be installed to remove the build-up of dirt and debris.

Harvest Information Technology

ActiveYield Retrofit Kit (Model Year 2012-Model Year 2015 S-Series Combines) - BXE10503

ActiveYield ensures accuracy of the combine’s yield with no time spent manually calibrating by the operator.

Feature benefit:

  • Increased uptime with zero operator time spent calibrating the yield monitor system
  • Improved real-time decision-making as ActiveYield enhances the accuracy of the combine's yield data
#

Functionality:

ActiveYield eliminates time-consuming manual calibrations and replaces them with automated sensors that calibrate the machine by measuring the grain as the tank fills. This enables decisions to be made in real time without leaving the cab, providing more accurate yield mapping data.

ActiveYield sensors in grain tankActiveYield sensors in grain tank

When the ActiveYield option is enabled and the Terrain Compensation Module (TCM) in the StarFire™ 3000 or StarFire 6000 Receiver has been calibrated, ActiveYield is ready to go to work. As grain is harvested and enters the tank, the three sensors within the grain tank collectively measure the grain as it piles over the cross auger covers. If all conditions are acceptable (header and separator on, grain is flowing, machine level within 4 degrees) load collection occurs from 900 through 3000 kg (2000 through 6600 lb).

 

Any pitch and roll of more than 4 degrees from center during load collection will cause the system to reject that load due to the grain pile shifting in the tank. A new calibration load starts once grain is below the sensors on the cross auger covers.

 

Stored calibration loads are replaced by new ones as the system continues to collect data. The system may be disabled at any time by accessing the moisture setup page and unchecking the ActiveYield box if manual yield calibration is desired.

ActiveYield calibration locationActiveYield calibration location
ActiveYield InformationActiveYield Information

ActiveYield is available for model year 2016 through model year 2019 S760, S770, S780, and S790 Combines and requires the 4600 CommandCenter™ Display, GreenStar™ 3 (GS3) 2630 Display, or GS3 CommandCenter. Additionally, a StarFire 3000 or 6000 Receiver must be installed on the combine with the TCM calibrated for ActiveYield to detect machine pitch correctly. Manual yield calibration is not required as each crop has a built-in default value.

 

Harvest Doc™ system yield data collected by an ActiveYield system is only compatible with the John Deere Operations Center. John Deere does not guarantee compatibility of ActiveYield collected documentation with John Deere APEX™ software or third-party software systems.

Ladder Extension

230 mm Bolt-on Single Tire Platform - BXE10121

This bolt-on access platform attachment is required for S700-Series Combines that are ordered less wheels and tires and later equipped with single front drive tires. Refer to the tire compatibility charts in the Agricultural Sales Manual for specific drive tire sizes and compatibility information for the 230-mm (9-in) bolt-on access platform. This attachment includes all the parts to install this ladder extension on S700-Series Combines.

330 mm Bolt-on Single Tire Platform - BXE10122

This bolt-on access platform attachment is required for S-Series Combines that are ordered less wheels and tires and later equipped with single front drive tires. Refer to the tire compatibility charts in the Agricultural Sales Manual for specific drive tire sizes and compatibility information for the 330 mm bolt-on access platform. This attachment includes all the parts for this specific ladder extension installation.

Dual Tire Extension - BXE10120

This bolt-on access platform attachment is required for S-Series Combines that are ordered less wheels and tires and later equipped with either dual front or single drive tires with axle spacers. Refer to the tire compatibility charts in the Agricultural Sales Manual for specific dual and single drive tire sizes and compatibility information for the dual tire platform extension.

Long Length Ladder  - BXE10420
Long-length ladder extension for S-Series Combines ordered less wheels and tires

This 1554-mm (61.2-in.) length ladder is required for S-Series Combines that are ordered less wheels and tires and later equipped with front drive tires for S-Series Combines that have a static loaded radious (SLR) of 910 mm (36 in.). Refer to the tire compatibility charts in the Agricultural Sales Manual for specific drive tire sizes and compatibility information for the long length 1554-mm (61.2-in.) ladder.

Medium Length Ladder - BXE10421
Short Length Ladder - BXE10422

Mirrors

Grain Tank Mirror Kit - KXE10458

Miscellaneous

ActiveYield Retrofit Kit (Model Year 2016 and newer S-Series Combines) - BXE10797

ActiveYield ensures accuracy of the combine’s yield with no time spent manually calibrating by the operator.

Feature benefit:

  • Increased uptime with zero operator time spent calibrating the yield monitor system
  • Improved real-time decision-making as ActiveYield enhances the accuracy of the combine's yield data
#

Functionality:

ActiveYield eliminates time-consuming manual calibrations and replaces them with automated sensors that calibrate the machine by measuring the grain as the tank fills. This enables decisions to be made in real time without leaving the cab, providing more accurate yield mapping data.

ActiveYield sensors in grain tankActiveYield sensors in grain tank

When the ActiveYield option is enabled and the Terrain Compensation Module (TCM) in the StarFire™ 3000 or StarFire 6000 Receiver has been calibrated, ActiveYield is ready to go to work. As grain is harvested and enters the tank, the three sensors within the grain tank collectively measure the grain as it piles over the cross auger covers. If all conditions are acceptable (header and separator on, grain is flowing, machine level within 4 degrees) load collection occurs from 900 through 3000 kg (2000 through 6600 lb).

 

Any pitch and roll of more than 4 degrees from center during load collection will cause the system to reject that load due to the grain pile shifting in the tank. A new calibration load starts once grain is below the sensors on the cross auger covers.

 

Stored calibration loads are replaced by new ones as the system continues to collect data. The system may be disabled at any time by accessing the moisture setup page and unchecking the ActiveYield box if manual yield calibration is desired.

ActiveYield calibration locationActiveYield calibration location
ActiveYield InformationActiveYield Information

ActiveYield is available for model year 2016 through model year 2019 S760, S770, S780, and S790 Combines and requires the 4600 CommandCenter™ Display, GreenStar™ 3 (GS3) 2630 Display, or GS3 CommandCenter. Additionally, a StarFire 3000 or 6000 Receiver must be installed on the combine with the TCM calibrated for ActiveYield to detect machine pitch correctly. Manual yield calibration is not required as each crop has a built-in default value.

 

Harvest Doc™ system yield data collected by an ActiveYield system is only compatible with the John Deere Operations Center. John Deere does not guarantee compatibility of ActiveYield collected documentation with John Deere APEX™ software or third-party software systems.

Advanced PowerCast Tailboard - BXE10354
Chopper Drive Shielding - BXE10357
Corn Kit OSB Cover - KXE10147
Overshot beater corn kit coverOvershot beater corn kit cover
Overshot beater corn kit coverOvershot beater corn kit cover

The overshot beater corn kit attachment is ideal for combines that are equipped with the premium residue tailboard during corn harvest. This attachment will protect the cleaning shoe from damage from cobs that can be thrown by the overshot beater.

Deflector - PowerCast Tailboard - KXE10121
Deflector for PowerCast tailboardDeflector for PowerCast tailboard
#

 This is the seal that is needed convert to the PowerCast tailboard.

Distribution Kit - Standard Flex Residue - KXE10148
Distribution bundle/deflector for premium residueDistribution bundle/deflector for premium residue
#

Is recommended to use when you have uneven residue distribution as a result of uneven material coming from the discharge beater. This bundle will help to improve that distribution as it’s moved into the residue system.

Dyna-Flo Plus Chaffer - AXE48125
Enhanced Front End Equipment Single Point Latching - BXE10670
Enhanced single-point latching systemEnhanced single-point latching system

John Deere’s single-point header latching system provides combine operators a fast and easy method for connecting all front-end equipment. One easy motion of the lever connects the electrical and hydraulic circuits along with header retaining pins.

  • No wrenches are required to complete the header-combine connection
  • Reduces the time required to change over headers, so there is more time available for harvesting
  • More convenient to remove headers for transport or storage

The enhanced single-point latching system, starting in model year 2016, will include a valve assembly mounted to all platform and corn head back sheets. These assemblies will include an orifice valve unique to the header type as well as a pressure override valve. Together, these ensure optimum performance and reliability of header hydraulic functions.

 

Compatibility for prior headers or combines to model year 2016 equipment is provided by attachments specific to the header and combine being used. Refer to the chart below for compatibility information.

 

Six different attachments cover the compatibility between new and used combines and front-end equipment. The attachments are BXE10667, BXE10666, BXE10668, BXE10670, BXE10697, and BXE10669.

#
#
Enhanced Front End Equipment Single Point Latching - BXE10697
Enhanced single-point latching systemEnhanced single-point latching system

John Deere’s single-point header latching system provides combine operators a fast and easy method for connecting all front-end equipment. One easy motion of the lever connects the electrical and hydraulic circuits along with header retaining pins.

  • No wrenches are required to complete the header-combine connection
  • Reduces the time required to change over headers, so there is more time available for harvesting
  • More convenient to remove headers for transport or storage

The enhanced single-point latching system, starting in model year 2016, will include a valve assembly mounted to all platform and corn head back sheets. These assemblies will include an orifice valve unique to the header type as well as a pressure override valve. Together, these ensure optimum performance and reliability of header hydraulic functions.

 

Compatibility for prior headers or combines to model year 2016 equipment is provided by attachments specific to the header and combine being used. Refer to the chart below for compatibility information.

 

Six different attachments cover the compatibility between new and used combines and front-end equipment. The attachments are BXE10667, BXE10666, BXE10668, BXE10670, BXE10697, and BXE10669.

#
#
Fine Cut Chopper Drive Bundle - BXE10361
Fine-cut chopper driveFine-cut chopper drive

This attachment features the drive components for the fine-cut chopper. The attachment would be needed when converting from straw spreaders to a deluxe-residue system with either a vane tailboard or PowerCast™ tailboard.

Fine Cut Chopper with Standard VTB Outlet - BXE10355
Fine-cut chopper with vane tailboard outletFine-cut chopper with vane tailboard outlet

This attachment is needed when converting from a less-residue option or straw spreaders to a fine-cut chopper. The S-Series straw chopper provides sizing and spreading of residue material across the entire width of the platform cutting width.

Flex Residue Straw Spreader with Integrated Chaff Spreading, In-Cab Variable, Single Speed Control - BXE10358
S-Series standard straw spreaderS-Series standard straw spreader

The twin-disc straw spreader system uses two large impellers to ensure uniform distribution of material from the separator and cleaning system. The spreader is recommended for use when tillage practices do not dictate fine sizing of crop residue.

Steel Paddle Tailing Elevator for all 50 Series, 60 Series and 70 Series Combines, and S550-S670/S770 (Parts) - H86760

When harvesting in wet or dirty conditions, the steel-paddle tailings elevator can be installed to remove the build-up of dirt and debris.

Operator's Station

Retrofit Kit for Foot Pegs - KXE10454
Smoker Option - BL15013

Ash tray and cigarette lighter attachment for S-Series cabs

Radio

XM Antenna Kit - KXE10497

Rear Axle with 2-Speed, 4-Wheel Drive

101 mm (4 In.) Axle Spacer - BH92266

Axle spacers enable specific tire spacing for S-Series Combines. Reference the attached Ag Sales Manual S-Series tire spacing chart for specific tire, tire spacing, and recommended axle spacer information. The axle spacer attachments include axle spacers, attaching hardware, truss rods, couplers, and shaft extensions. Ladder extensions are typically required and ordered separately to provide the necessary clearance between the tires and ladder.

 

Please reference the following documents for more detailed information.

S-Series tire compatibility and spacing chart

Axle spacer chart

101 mm (4 In.) Wheel Spacer - BH92134

Axle spacers enable specific tire spacing for S-Series Combines. Reference the attached Ag Sales Manual S-Series tire spacing chart for specific tire, tire spacing, and recommended axle spacer information. The axle spacer attachments include axle spacers, attaching hardware, truss rods, couplers, and shaft extensions. Ladder extensions are typically required and ordered separately to provide the necessary clearance between the tires and ladder.

 

Please reference the following documents for more detailed information.

S-Series tire compatibility and spacing chart

Axle spacer chart

165 mm (6.5 In.) Axle Spacer - BH92268

Axle spacers enable specific tire spacing for S-Series Combines. Reference the attached Ag Sales Manual S-Series tire spacing chart for specific tire, tire spacing, and recommended axle spacer information. The axle spacer attachments include axle spacers, attaching hardware, truss rods, couplers, and shaft extensions. Ladder extensions are typically required and ordered separately to provide the necessary clearance between the tires and ladder.

 

Please reference the following documents for more detailed information.

S-Series tire compatibility and spacing chart

Axle spacer chart

2-Speed, 4-Wheel Drive for Adjustable Rear Axle (PIN 785001 - ) - BXE10751
S700 rear-wheel assist motorS700 rear-wheel assist motor
#

Feature benefit:

  • Allows harvest to continue in muddy field conditions
  • Provides increased maneuverability and steering when ground conditions are wet or slick
  • Increases ground drive torque that may be needed when harvesting on slopes
  • Two-speed feature provides versatility to maximize harvest productivity when maximum ground drive torque or faster ground speed is needed.

 

Functionality:

Specifications of the 2294-cc (140-cu in.) 4WD system include:

  • In the slow-speed mode, the system provides a maximum of 2294-cc (170-cu in.) displacement per motor for maximum (high-torque) rear-wheel assist.
  • In the high-speed mode, the system provides 1147 cc (70-cu in.) of displacement for (low-torque) rear-wheel assist and faster ground speed capability.

On all ProDrive™ transmission machines, low-speed 4WD engagement is limited to 10 km/h (6.2 mph) and high-speed 4WD engagement is limited to 15.9 km/h (9.9 mph) with maximum speed up to 20 km/h (12.4 mph).

2-Speed, 4-Wheel Drive for Adjustable Rear Axle (PIN 785001 - ) - BXE10786
S700 rear-wheel assist motorS700 rear-wheel assist motor
#

Feature benefit:

  • Allows harvest to continue in muddy field conditions
  • Provides increased maneuverability and steering when ground conditions are wet or slick
  • Increases ground drive torque that may be needed when harvesting on slopes
  • Two-speed feature provides versatility to maximize harvest productivity when maximum ground drive torque or faster ground speed is needed.

 

Functionality:

Specifications of the 2294-cc (140-cu in.) 4WD system include:

  • In the slow-speed mode, the system provides a maximum of 2294-cc (170-cu in.) displacement per motor for maximum (high-torque) rear-wheel assist.
  • In the high-speed mode, the system provides 1147 cc (70-cu in.) of displacement for (low-torque) rear-wheel assist and faster ground speed capability.

On all ProDrive™ transmission machines, low-speed 4WD engagement is limited to 10 km/h (6.2 mph) and high-speed 4WD engagement is limited to 15.9 km/h (9.9 mph) with maximum speed up to 20 km/h (12.4 mph).

304 mm (12 In.) Axle Spacer - BH92259

Axle spacers enable specific tire spacing for S-Series Combines. Reference the attached Ag Sales Manual S-Series tire spacing chart for specific tire, tire spacing, and recommended axle spacer information. The axle spacer attachments include axle spacers, attaching hardware, truss rods, couplers, and shaft extensions. Ladder extensions are typically required and ordered separately to provide the necessary clearance between the tires and ladder.

 

Please reference the following documents for more detailed information.

S-Series tire compatibility and spacing chart

Axle spacer chart

406 mm (16 In.) Axle Spacer - BH92261

Axle spacers enable specific tire spacing for S-Series Combines. Reference the attached Ag Sales Manual S-Series tire spacing chart for specific tire, tire spacing, and recommended axle spacer information. The axle spacer attachments include axle spacers, attaching hardware, truss rods, couplers, and shaft extensions. Ladder extensions are typically required and ordered separately to provide the necessary clearance between the tires and ladder.

 

Please reference the following documents for more detailed information.

S-Series tire compatibility and spacing chart

Axle spacer chart

457 mm (18 In.) Axle Spacer - BH92263

Axle spacers enable specific tire spacing for S-Series Combines. Reference the attached Ag Sales Manual S-Series tire spacing chart for specific tire, tire spacing, and recommended axle spacer information. The axle spacer attachments include axle spacers, attaching hardware, truss rods, couplers, and shaft extensions. Ladder extensions are typically required and ordered separately to provide the necessary clearance between the tires and ladder.

 

Please reference the following documents for more detailed information.

S-Series tire compatibility and spacing chart

Axle spacer chart

50 mm Wheel Spacer Assembly - Single Wheel Only - BXE10141
50-mm (2-in.) wheel spacer assembly for single wheel only with S-Series Combines

A 50-mm (2-in.) wheel spacer is available for spacing of front combine tires for certain tire spacings. Reference the Ag Sales Manual S-Series tire spacing chart for specific tire, tire spacing, and recommended uses of the 50-mm (2-in.) wheel spacer. This 50-mm (2-in.) wheel spacer is available for single front combine tires only.

 

Reference the axle spacer chart in the Ag Sales Manual for ordering information.

50-mm (2-In.) wheel spacer - BH92131

Axle spacers enable specific tire spacing for S-Series Combines. Reference the attached Ag Sales Manual S-Series tire spacing chart for specific tire, tire spacing, and recommended axle spacer information. The axle spacer attachments include axle spacers, attaching hardware, truss rods, couplers, and shaft extensions. Ladder extensions are typically required and ordered separately to provide the necessary clearance between the tires and ladder.

 

Please reference the following documents for more detailed information.

S-Series tire compatibility and spacing chart

Axle spacer chart

Enhanced Front End Equipment Single Point Latching - BXE10669
Enhanced single-point latching systemEnhanced single-point latching system

John Deere’s single-point header latching system provides combine operators a fast and easy method for connecting all front-end equipment. One easy motion of the lever connects the electrical and hydraulic circuits along with header retaining pins.

  • No wrenches are required to complete the header-combine connection
  • Reduces the time required to change over headers, so there is more time available for harvesting
  • More convenient to remove headers for transport or storage

The enhanced single-point latching system, starting in model year 2016, will include a valve assembly mounted to all platform and corn head back sheets. These assemblies will include an orifice valve unique to the header type as well as a pressure override valve. Together, these ensure optimum performance and reliability of header hydraulic functions.

 

Compatibility for prior headers or combines to model year 2016 equipment is provided by attachments specific to the header and combine being used. Refer to the chart below for compatibility information.

 

Six different attachments cover the compatibility between new and used combines and front-end equipment. The attachments are BXE10667, BXE10666, BXE10668, BXE10670, BXE10697, and BXE10669.

#
#
Parts Assembly - Box of Final Drive Axle Extensions - BH81747

Residue Disposal

APC Corn Kit - KXE10135
Paddles for APC corn kitPaddles for APC corn kit
Paddles for APC corn kitPaddles for APC corn kit

The Advanced PowerCast tailboard corn kit is recommended for combines that are equipped with the Advanced PowerCast tailboard during the corn harvest. The tailboard kit prevents damage to the straw paddled by large corn cobs and other foreign material. This attachment will improve distribution and wear characteristics of the Advanced PowerCast system when used in corn.

Fine Cut Chopper Drive Bundle - BXE10184
Fine-cut chopper driveFine-cut chopper drive

This attachment features the drive components for the fine-cut chopper. The attachment would be needed when converting from straw spreaders to a deluxe-residue system with either a vane tailboard or PowerCast™ tailboard.

Fine Cut Chopper with Standard VTB Outlet - BXE10172
Fine-cut chopper with vane tailboard outletFine-cut chopper with vane tailboard outlet

This attachment is needed when converting from a less-residue option or straw spreaders to a fine-cut chopper. The S-Series straw chopper provides sizing and spreading of residue material across the entire width of the platform cutting width.

Flex Residue Straw Spreader with Integrated Chaff Spreading, In-Cab Variable, Single Speed Control - BXE10181
S-Series standard straw spreaderS-Series standard straw spreader

The twin-disc straw spreader system uses two large impellers to ensure uniform distribution of material from the separator and cleaning system. The spreader is recommended for use when tillage practices do not dictate fine sizing of crop residue.

Hydraulic + Electric for Advanced PowerCast (FC and XFC) - BXE10498
Hydraulic Plus Electric for Advanced PowerCast Fine-Cut and Extra-Fine-Cut (FC and XFC) - BXE10363
Hydraulics and electrics for Advanced PowerCastHydraulics and electrics for Advanced PowerCast
#

This attachment is for the hydraulic and electrics required for the Advanced PowerCast conversion.

Hydraulic Plus Electric for Straw Spreaders: Dual-speed - BXE10211
Hydraulics and electrics for spreadersHydraulics and electrics for spreaders
#

The twin-disc straw spreader system uses two large impellers to ensure uniform distribution of material from the separator and cleaning system. The spreader is recommended for use when tillage practices do not dictate fine sizing of crop residue.

 

Straw spreader options:

 

1. Standard straw spreader

  • This spreader is not recommended for use with greater than 9.14-m (30-ft) platforms 

2. Widespread straw spreader (not available on the S650)

  • This spreader is recommended for use with 9.14-m (30-ft) to 12.2-m (40-ft) platforms
  • On the S660-S690 speeds of the spreader can be independently controlled
  • This spreader is not recommended for use in rice applications
Hydraulic Plus Electric for Straw Spreaders: Dual-speed - BXE10368
Hydraulics and electrics for spreadersHydraulics and electrics for spreaders
#

The twin-disc straw spreader system uses two large impellers to ensure uniform distribution of material from the separator and cleaning system. The spreader is recommended for use when tillage practices do not dictate fine sizing of crop residue.

 

Straw spreader options:

 

1. Standard straw spreader

  • This spreader is not recommended for use with greater than 9.14-m (30-ft) platforms 

2. Widespread straw spreader (not available on the S650)

  • This spreader is recommended for use with 9.14-m (30-ft) to 12.2-m (40-ft) platforms
  • On the S660-S690 speeds of the spreader can be independently controlled
  • This spreader is not recommended for use in rice applications
Hydraulic Plus Electric for Straw Spreaders: Single Speed - BXE10193
Hydraulics and electrics for spreadersHydraulics and electrics for spreaders
#

The twin-disc straw spreader system uses two large impellers to ensure uniform distribution of material from the separator and cleaning system. The spreader is recommended for use when tillage practices do not dictate fine sizing of crop residue.

 

Straw spreader options:

 

1. Standard straw spreader

  • This spreader is not recommended for use with greater than 9.14-m (30-ft) platforms 

2. Widespread straw spreader (not available on the S650)

  • This spreader is recommended for use with 9.14-m (30-ft) to 12.2-m (40-ft) platforms
  • On the S660-S690 speeds of the spreader can be independently controlled
  • This spreader is not recommended for use in rice applications
Hydraulic Plus Electric for Straw Spreaders: Single Speed - BXE10366
Hydraulics and electrics for spreadersHydraulics and electrics for spreaders
#

The twin-disc straw spreader system uses two large impellers to ensure uniform distribution of material from the separator and cleaning system. The spreader is recommended for use when tillage practices do not dictate fine sizing of crop residue.

 

Straw spreader options:

 

1. Standard straw spreader

  • This spreader is not recommended for use with greater than 9.14-m (30-ft) platforms 

2. Widespread straw spreader (not available on the S650)

  • This spreader is recommended for use with 9.14-m (30-ft) to 12.2-m (40-ft) platforms
  • On the S660-S690 speeds of the spreader can be independently controlled
  • This spreader is not recommended for use in rice applications
Hydraulic Plus and Electric for PowerCast - BXE10198
Hydraulics and electrics for PowerCastHydraulics and electrics for PowerCast
#

This attachment is the hydraulic and electrics required for the PowerCast conversion.

Hydraulic Plus and Electric for PowerCast - BXE10365
Hydraulics and electrics for PowerCastHydraulics and electrics for PowerCast
#

This attachment is the hydraulic and electrics required for the PowerCast conversion.

PowerCast Tailboard - BXE10174
PowerCast tailboardPowerCast tailboard
S680 with PowerCast tailboardS680 with PowerCast tailboard

To better manage residue distribution with wider platforms, the PowerCast tailboard spreads residue 9.1 m (30 ft) and wider. This feature spreads residue evenly which helps set the stage for even crop emergence once planted, especially in no-till farming practices.

 

The PowerCast tailboard is a hydraulically powered tailboard assembly that mounts to the rear of the chopper. Two hydraulically driven, counter-rotating discs with paddles are mounted in the tailboard. Crop is discharged from the chopper to the spinning discs, where the velocity of the residue is increased so it can be distributed across the platform cut width, as desired. The distribution discs are driven by the same pump, and the speed is controlled by a button on the CommandTouch™ armrest.

Standard Deflectors - BXE10179
Standard deflectorsStandard deflectors
#

This attachment is for producers moving from straw spreaders/less residue to a deluxe residue system equipped with a vane tailboard.  

Standard Vane Manual Tailboard - BXE10176
Manual vane tailboardManual vane tailboard
Manual vane tailboard mountedManual vane tailboard mounted

The manually adjustable vane tailboard design provides a residue spread pattern for platform cut widths up to and including 9.14 m (30 ft).

 

The manually adjustable vane tailboard allows simple vane angle adjustments from the ground. Manually adjust the vane position, as required, to meet the desired spread width.

Straw Spreader Parts, Extra Wide, for use on Twin Disk, Wide Spread with Integrated Chaff Spreader - BH84523
Standard straw spreader up to 9.1 m (30 ft)Standard straw spreader up to 9.1 m (30 ft)
Twin-disk straw spreaderTwin-disk straw spreader

The twin-disk straw spreader system uses two large impellers to ensure uniform, wide distributiion of material from the separator and cleaning system. The spreader is recommended for use when tillage practices do not dictate fine sizing of crop residue.

 

Spreader disks are hydraulically driven by two hydraulic motors, and the disk speed can be varied from 150 rpm to 500 rpm right from the operator's station, spreading residue up to 9.1 m (30 ft).
 
The spreader speed is displayed on the CommandCenter™ armrest display. The operator simply dials in the setting using the set-point adjustment feature.
 
The straw spreader easily swings up out of the way for windrow applications, and the speed can be set to zero.

Field-installation information
WSSS kit up to 12.1 m (40 ft)WSSS kit up to 12.1 m (40 ft)

If spread widths greater than 9.1 m (30 ft) (up to 12.1 m [40 ft]) are desired, a field-installed bundle is available: BH84523.

 

NOTE: Not for use on 9560 or 9570 STS™ Combines.

Separation

Heavy Duty Grate - Separator Covers (Set of 20) - BXE10646