New 625D Draper

Specifications

Compare >>> Select up to 2 models to compare specifications

John Deere625D Draper

Add Model --Please Select-- 94C - 30,36,40,42 94C- 25 DH- 25 SP25 D50 D60-25ft

Add Model --Please Select-- 94C - 30,36,40,42 94C- 25 DH- 25 SP25 D50 D60-25ft

Type	Straight line knife drive system
Length	7.8 m 25.5 ft
Knife drive	Base single, optional dual knife (combine use only) Base dual knife (SPW only or SPW/combine combination use)
Knife speed	490 cycles/min 1,040 spm
Cutterbar tilt	Base Hydraulic, 9 degrees tilt maximum

Number of slats	6 bat poly base 8 bat steel optional (for forage conditions)
Fingers	Nylon (steel optional, typically used in rice or forage conditions)
Diameter	1,067 mm 42 in. For rice or forage conditions 1,371 mm 54 in.
Height control	Hydraulic
Speed control	Hydraulic
Reel lift	Cylinder stroke 330 mm 13 in. Total range 391.5 mm 15.4 in.
Reel fore and aft	Cylinder stroke 359 mm 14.1 in. Total range 620 mm 24.4 in.
Reel resume	Base
Reel reverse	Base
Operating speeds	6-54 rpm
Operating speeds (54-in. reel)	5-44 rpm

Number of slats
Diameter
Height control
Speed control
Operating speeds

Width	0.7 L 24 oz rubber coated polyester with V-Guide tracking Side belts 1,016 mm 40 in. Center belts 1,397 mm 55 in. Center belt not included with SPW configuration
Clean height	25.4 mm 1 in.
Operating speed	Side belts: variable up to 223 m/min 735 fpm Center belts: 212 m/min 695 fpm Center belt not included with SPW configuration
Speed control	Hydraulic from cab
Center belt reverse	Base; Center belt not included with SPW configuration

Diameter	406 mm 16 in. Feed drum not included with SPW configuration
Feed drum fingers	Steel heavy-duty round 16 mm (0.625 in) diameter with breakaway notch and retainer
Number of fingers	18
Auger finger platform	Dual chevron, retracting
Finger reach	152 mm 6 in.
Drum/auger reverse	Base
Operating speed	195 rpm
Center clean out door	Base

Type	Electro-hydraulic base
Header height sensing on the ground	Base
Header height sensing off the ground

Type	Optional hydraulic drive

Platform length	8.5 m 27.9 ft
Overall operating depth	2.4 m 7.9 ft
Transport width, field position	8.1 m 26.5 ft
Transport width on wheel, less dividers
Transport length, hitch extended

Approximate weight (slat reel)
Approximate weight (pickup reel)	Combine only 2,884 kg 6,359 lb SPW only 2,284 kg 5,036 lb
Approximate weight (with transport)
Approximate weight (optional 54-in. reel)	Combine only 2,974 kg 6,556 lb SPW only 2,374 kg 5,234 lb