New 348 Small Square Baler

Specifications

Compare >>> Select up to 2 models to compare specifications

John Deere348 Small Square Baler

Add Model --Please Select-- SBX530 SBX540 SB34 SB36 BC5060 BC5070 BC5080 BC5050

Add Model --Please Select-- SBX530 SBX540 SB34 SB36 BC5060 BC5070 BC5080 BC5050

Minimum PTO	26 kW 35 PTO hp
Pickup width	187.9 cm 74 in.
Bale size	Height x width 36x46 cm 14x18 in. Length 30.5 to 127 cm 12 to 50 in.
Adjustable Hydraulic Bale Density	Optional
Plunger - Strokes/minute	93 spm

Height x width	36 x 46 cm 14 x 18 in.
Length	30.5 to 127 cm 12 to 50 in.
Maximum volume
Dry bale weight

Pickup width	187.9 cm 74 in.
Tooth bars/teeth	6 bars, 156 teeth
Lift control	Crank (hydraulic optional)
Pickup diameter	49.5 cm 19.5 in.
Compression rack rods

Diameter	41 cm 16 in.
Length	154.9 cm 61 in.
Feed opening

Strokes/minute	93 spm
Stroke length

No. of knotters	2
Twine capacity	8
Twine type	Plastic or sisal
Knot strength (minimum required)
Central lube system	Optional
Wire twisters
Wire ball capacity	4

Length w/ short tongue
Length w/ long tongue	576.5 cm 227 in.
Width	274.3 cm 108 in.
Height	170.2 cm 67 in.
Weight empty	1411 kg 3110 lb

PTO speed	540 rpm
Minimum PTO	26 kW 35 PTO hp

Driveline	Equal angle 3 joint category 4
Optional driveline	Equal angle 3 joint category 5
Pickup	Belt
Plunger	Gear and shaft
Knotters	Gear and shaft
Feeder forks	Gear and shaft
Diameter of flywheel

PTO
Gearbox
Pickup	Belt slip
Needles	Shear bolt/plunger head stop
Knotters	Shear bolt

RH Standard tire size	26x12.0-12, 4 ply
RH Optional tire size
LH Standard tire size	11L-14, 6 ply
LH Optional tire size
Gauge Wheels	1 optional
Pickup Gauge Wheels Tires Size	16.5x6.50-8

Work	Optional
Transport lights

Adjustable Bale Density	Mechanical crank
Adjustable Hydraulic Bale Density	Optional
Bale Counter

Available	Optional

Regular bale chute
Short chute	Optional
Long chute	Optional
Side bale drop chute	Optional
Wagon hitch	Optional