RC20 Series Rotary Cutters
❮
❯
❯
- Slip-Clutch or shear bolt driveline protection
- Puncture resistant tires
- 4 available widths: 48in, 60in, 72in, 84in
- Frontier’s everyday affordability
- Same low-rate financing when purchased with new John Deere tractor
Key Features
Easy-to-Maneuver Deck

The round-back deck design on the RC20 Series Rotary Cutter enables easy maneuvering into tight corners and around trees, fences, and other hard-to-reach areas.
Deck Deflectors Offered in Chain or Rubber

The front deck and deflector support are flush with the deck on the RC20 Series Rotary Cutters. This allows water and debris an unrestricted exit off the top of the deck. These deflectors are available in rubber or chain on the front or metal or chain on the rear.
Adjustable Cutting Height of 1.5 to 9 in. (3.8 to 22.9 cm)

Adjusting the cutting height is easy. Along with adjusting a tractor's three-point linkage, simply move the support bar to the desired cutting height. The RC20 Series Rotary Cutters go as low as 1.5 in. (3.8 cm) or as high as 9 in. (22.9 cm).
Specifications
- Dimensions
| Overall Width | 51 in. |
|---|---|
| Overall Width | 129 cm |
| Overall Length | 87 in. |
| Overall Length | 220 cm |
- Weight
| Operating | 512 lb. |
|---|---|
| Operating | 232 kg |
- Tractor Compatibility
| PTO Power | 45 hp |
|---|---|
| PTO Power | 33 kW |
| Tractor PTO | 540 rpm |
| PTO Category | ASAE 3 |
- Gear Case
| Horsepower | 45 hp |
|---|---|
| Horsepower | 34 kW |
- Driveline
| Type | Shear bolt or slip clutch |
|---|
- Hitch
| Type | Lift-type |
|---|---|
| Hitch Category | Category 1, adaptable to Category 2 |
| iMatch™ Compatible | Yes |
| AutoHitch™ Compatible | Yes |
- Deck
| Thickness | 0.12 in. |
|---|---|
| Thickness | 3.03 mm |
| Thickness | 11 gauge |
| Shape | Flat-open round back |
| Type | Single |
- Skirt
| Thickness | 0.12 in. |
|---|---|
| Thickness | 3.03 mm |
| Thickness | 11 gauge |
- Capacity
| Cutting Width | 48 in. |
|---|---|
| Cutting Width | 122 cm |
| Cutting Height | 1.5-9 in. |
| Cutting Height | 45770 cm |
| Cutting Diameter | 1 in. |
| Cutting Diameter | 2.5 cm |
| Cutting Chamber Depth | 7.5 in. |
| Cutting Chamber Depth | 19 cm |
- Blades
| Tip Speed | 13090 fpm |
|---|---|
| Tip Speed | 66.5 m/s |
| Type | Heat treated, suction |
| Thickness | 0.5 in. |
| Thickness | 13 mm |
| Width | 3 in. |
| Width | 76 mm |
- Blade Holder
| Type | Round pan-type |
|---|---|
| Diameter | 22.3 in. |
| Diameter | 567 mm |
- Wheels
| Type | Laminated |
|---|---|
| Diameter Laminated | 15 in. |
| Diameter Laminated | 381 mm |
| Width Laminated | 3.75 in. |
| Width Laminated | 95 mm |
| Diameter Rubber | 15 in. |
| Diameter Rubber | 381 mm |
| Width Rubber | 3.75 in. |
| Width Rubber | 95 mm |
- Safety
| Markings | Standard |
|---|---|
| Front Deflector | Standard |
| Rear Deflector | Standard |
- Setup Time
| Labor Hours | 1 hr |
|---|
- Warranty
| Time Period | 1 year |
|---|---|
| Gearbox | 1 year |
Videos
No Videos found.
Price Watcher
Product Brochure