New DH52F Series Folding Offset Disks

Specifications

Compare >>> Select up to 2 models to compare specifications

John DeereDH52F Series Folding Offset Disks

Add Model --Please Select-- BH-540EP

Add Model --Please Select-- BH-540EP

Width	3.8 m 12.5 ft
Ground clearance with base blades	20.3 cm 8 in.
Wheel hub bearings	Dual tapered roller bearings
Height
Length

Approximate working width	7.3 m 24 ft
Maximum penetration	22.9 cm 9 in.

Net	6804 kg 15000 lb
Weight per disk blade	124 kg 273 lb

Recommended PTO hp range	175-228 kW 235-306 hp
Recommended drawbar hp range	149.1-193.9 kW 200-260 hp

Type	Single offset folding
Duty	Medium
Tube size	15.2x15.2x0.95 cm 6x6x0.375 in.

Front hitch type	Spade
Bolt-on rear hitch

Spacing	26.7 cm 10.5 in.
Quantity	57
Type	Notched (front) Notched (rear) Standard Smooth (front) Smooth (rear) Optional Notched (front) Smooth (rear) Optional
Blade concavity	Standard: high Optional: low

Blade option one	660x7.9 mm 26x0.312 in.
Blade option two	711x7.9 mm 28x0.312 in.
Blade option three
Blade option four
Blade option five
Blade option six

Front angle	2 Positions
Rear angle	2 Positions
Furrow fillers
Axle size	4.1 cm 1.625 in. or 5.4 cm 2.125 in.
Axle material	Round heat treated alloy steel threaded on both ends
Bearing type	Oil bath tapered roller
Bearing wear plates	Standard
Bearing standards	Welded, Reinforced
Scrapers	Adjustable

Markings	SMV
Safety tow chain	Yes
Lights	Yes

Type	Implement - Quantity of 4
Size	12.5L x 15 10 ply in.
Wheel hub type	8 Bolt

Labor hours	4-6 for two people

Time period	1 year

Approximate working width
Disk blades
Frame
Notched (front) Notched (rear)
Recommended drawbar hp range
Transport - Width