New DH52 Series Offset Disks

Specifications

Width	6.1 m 20 ft
Ground clearance with base blades	20.3 cm 8 in.
Wheel hub bearings	Dual tapered roller bearings
Height
Length

Approximate working width	5.8 m 19 ft
Maximum penetration	22.9 cm 9 in.

Net	5012.2 kg 11050 lb
Weight per disk blade	116.6 kg 257 lb

Recommended PTO hp range	149-175 kW 200-235 hp
Recommended drawbar hp range	126.8-149.1 kW 170-200 hp

Type	Single offset rigid
Duty	Medium
Tube size	15.2x15.2x0.95 cm 6x6x0.375 in.

Front hitch type	Spade
Bolt-on rear hitch

Spacing	26.7 cm 10.5 in.
Quantity	45
Type	Notched (front) Notched (rear) Standard Smooth (front) Smooth (rear) Optional Notched (front) Smooth (rear) Optional
Blade concavity	Standard: high Optional: low

Blade option one	660x7.9 mm 26x0.312 in.
Blade option two	711x7.9 mm 28x0.312 in.
Blade option three
Blade option four
Blade option five
Blade option six

Front angle	2 Positions
Rear angle	2 Positions
Furrow fillers
Axle size	4.1 cm 1.625 in. or 5.4 cm 2.125 in.
Axle material	Round heat treated alloy steel threaded on both ends
Bearing type	Oil Bbth tapered roller
Bearing wear plates	Standard
Bearing standards	Welded, Reinforced
Scrapers	Adjustable

Markings	SMV
Safety tow chain	Yes
Lights	Yes

Type	Implement - Quantity of 4
Size	12.5L x 15 10 ply in.
Wheel hub type	8 Bolt

Labor hours	2-3 for two people

Time period	1 year

Approximate working width
Disk blades
Frame
Notched (front) Notched (rear)
Recommended drawbar hp range
Transport - Width