New AutoTrac™ RowSense™ - Sprayer AutoTrac™ RowSense™ - Sprayer

Guidance & Machine Control
VALUE MY TRADE REQUEST A QUOTE
VALUE MY TRADE REQUEST A QUOTE
Key Features
  • Paddle sensor mounted on front wheel
  • For late, post-emerge applications
  • Approved for 30-in to 40 in (76 cm-101.6 cm) corn
  • For all 4 Series Sprayers

More Info

Features

Reduce operator stress while following row crops
AutoTrac™ Vision system
Application operator using AutoTrac Vision following row cropsApplication operator using AutoTrac Vision following row crops
  • Following a row in these situations can be stressful and tiring for even the most highly skilled operators. An operator focusing on the crop row to prevent damage for extended periods of time during the day can lead to fatigue and enable mistakes such as damaged crop and reduced yield.
  • AutoTrac Vision can make it easier to monitor other key spraying functions, like flow rate, pressure, boom height, and other application variables. Results from an infield eye-tracking study indicate that operators with AutoTrac Vision spend 13 percent less time looking forward focusing on driving machine that when they were driving manually without AutoTrac Vision
Breakdown of an operator’s attention with AutoTrac VisionBreakdown of an operator’s attention with AutoTrac Vision
AutoTrac™ RowSense™ system
A relaxed operator using AutoTrac RowSense software in an R4038A relaxed operator using AutoTrac RowSense software in an R4038
A relaxed operator using AutoTrac RowSenseA relaxed operator using AutoTrac RowSense

Anyone who has spent a long day spraying fungicide in July or harvesting corn in October knows how stressful it can be to stare forward out of the cab and focus on the corn row ahead. On top of steering the machine, an operator is required to monitor machine performance, spray rates, manage grain handling or tender trucks, and monitor grain or forage quality all while watching for part failures and maintenance issues. Operating at night, in windy conditions, or while harvesting lodged corn can add even more stress to the operation.

A study using advanced, eye-tracking glasses determined where an operator’s attention is focused while operating a sprayer through tall, standing corn. Without AutoTrac RowSense or Vision, the operator spent about 82.5 percent of the time looking forward. When AutoTrac RowSense or Vision was utilized, the same operators only spent 70 percent of the time looking forward and more time watching sprayer booms and monitoring machine performance on the vehicle display. AutoTrac RowSense focuses on steering so the operator can focus on other value-added tasks.

Maximize equipment efficiency
AutoTrac™ Vision
Sprayer with AutoTrac Vision cameraSprayer with AutoTrac Vision camera
  • When weeds begin to emerge in the growing crop, applicators have a race against time. Palmer Amaranth or pigweed can be the most notorious because once they emerge they will be too established to affectively treat within 10 days. Palmer Amaranth is a prolific seed producer with the potential of producing nearly half a million seeds and at least 100,000 seeds when competing with a producers crop. Therefore, getting the job done at the right time and in time is critical to reducing future weed pressures and potential yield reduction.
  • AutoTrac Vision could allow the user to spray up to 20 percent faster in the row compared to manually driving today. Growers are working long hours and it is a crucial time to get the job done, AutoTrac Vision will enable fewer mistakes at higher operator speeds.
AutoTrac RowSense™ system
Sprayer with RowSense sensorSprayer with RowSense sensor

Getting more work done in less time is the name of the game for progressive producers, ag service providers, and custom spraying operations. One way to do this is to make sure equipment is operating at the optimum operating speed as much as possible.

While operating a self-propelled sprayer, consistent, optimal operating speeds lead to covering more acres per day. This means more revenue for ag service providers and more timely chemical applications within narrow windows for producers. Also, driving at a consistent speed is critical for applying accurate chemical rates across the entire field for more effective applications. With RowSense driving the sprayer through the row, even in varying field conditions, operators of any experience level will be able to the maximize productivity and efficiency of product applications.

Follow the correct row with RowSense™ system
AutoTrac™ Vision can fall-back to GPS lineAutoTrac™ Vision can fall-back to GPS line

All operators know that not all fields are created equal. In some instances, there will be nice even, clean stands while other may have washouts, missing crop and excessive weeds pressure. In these situations, AutoTrac™ Vision system will fall back on the GPS to keep the vehicle in the row. With AutoTrac Vision, the camera is the first priority, when the camera does not have confidence in the row crop due to crop stand or slope in the land, it will fall back on GPS. Once crop is detected and the camera has confidence in performance it will engage AutoTrac Vision.

 

Operators will now have the ability to choose to operate with both sensors when applying in later-season corn (Vision and RowSense). The system will use Vision first for priority and then fall back to RowSense if Vision confidence is lower than optimal operating range. This is called RowSense fallback. If confidence is low on AutoTrac Vision and RowSense, the system defaults to GPS using the operator’s guidance line.

 

The sprayer operator will have the opportunity to see a live AutoTrac Vision feed on the GreenStar™ 2630 Display. This will include an overlay with informative graphics to indicate how well AutoTrac is performing and if the wheels are centered in the crop row.

 

  • Camera icon
  • Boom icon
  • Row-spacing icon
  • RowSense icon
  • Camera feed
  • Row center indicator
  • Wheel center indicator
  • Crop row indicator

 

With AutoTrac RowSense system, the row sensors are the first priority when it comes to guiding the machine down the row. As long as the sensors detect the corn plants, these inputs will be provided to the AutoTrac system and the machine will follow the row. In other instances, where the sensors are not detecting crop rows due to missing plants, the system will quickly switch to GPS-only guidance until good, stable rows are detected again.

 

For example, crop stands following a wet spring may have uneven stands and areas where the corn was drowned out. While spraying, as the machine crosses into the washed out areas the system will detect that crop is missing and will quickly switch to GPS-only mode to guide the sprayer across the troubled area and into the correct row on the other side. When harvesting and crossing a passable waterway, the system will behave similarly guiding the combine or self-propelled forage harvester (SPFH) into the proper row on the other side. In either situation, staying on the correct row maximizes efficiency in the field. GPS fusion ensures the operator follows the correct row even when conditions get tough.

Improve yields through accurate row following
AutoTrac™ Vision
AutoTrac Vision minimizes crop damageAutoTrac Vision minimizes crop damage

In today’s economy leaving any yield in the field during the growing season is unacceptable. Running over crop in post emerge application will quickly reduce a producer’s overall yield. AutoTrac Vision will give a producer an opportunity to capitalize on potential lost yield. An operator could see reduced crop damage by minimizing the instances when a lapse in attention results in significant crop damage.

The chart below shows plants damaged at a variety of operating speeds and seed population.

AutoTrac RowSense™ system
AutoTrac RowSense in late-season cornAutoTrac RowSense in late-season corn

Producers work too hard to grow quality crops to afford to leave any of that yield potential in the field. However, while spraying standing corn, yield-limiting damage or losses can occur. When spraying, some operators may choose to cross crop rows to simplify spraying and reduce stress. However, this method of spraying can damage more the 2 percent of the plants in the field. To improve yields, many operators will follow crop rows to reduce this damage. In this instance, keeping the sprayer’s wheels in between the corn rows is important to ensure that plants are not damaged and can reach their full yield potential. Unfortunately, with so much going on in the sprayer cab during long days, a small lapse in attention can result in significant crop damage. For example, an operator spraying at 15 miles per hour who is misaligned with the row for 1 second could damage more than 90 corn plants. During the course of a day, a few minor misalignments could lead to major damage. With AutoTrac RowSense, the operator can be confident that the sprayer is staying in the row, even if they cannot physically see the sprayer wheels.

 

Corn populationOperating speed (km/h, mph)Plants damaged in 1 second of misalignment
28,000 seeds per acre   19 km/h (12 mph)56
24 km/h (15 mph)70
29 km/h (18 mph)85
32,000 seeds per acre  19 km/h (12 mph)64
24 km/h (15 mph)80
29 km/h (18 mph)97
36,000 seeds per acre  19 km/h (12 mph)73
24 km/h (15 mph)91
29 km/h (18 mph)109
Automatic guidance comes standard with operator benefits
Automatic guidance promotes the best operating experienceAutomatic guidance promotes the best operating experience

Automatic guidance products offered by John Deere allow operators:

  • To be more productive while focusing on tasks other than steering while traveling down the field
  • To be proactive by having the time to monitor the machine head or implement more closely to see if parts are wearing out or failing
  • To watch out for damaging obstacles in the field such as rocks, washouts, or holes caused by broken tile lines

 All of these benefits result in more uptime for the equipment and an operator who is more alert throughout the day.

Accessories and Attachments

AutoTrac Vision and AutoTrac RowSense

AutoTrac RowSense Extension Kit - BPF11507
AutoTrac RowSense High Clearance Extension Kit - BPF11524
Video Harness - 4 Series Sprayers - BPF11563